 | Pleated Filters These filters offer greater filtration surface. For superior performance at a great price, choose pleated filters. Equipped with a reinforced frame, the Maxi-40 and the Dust Controller are also available with antibacterial treatment. Pleated filters are designed to fulfill all your heating and air conditioning needs. They are often used as pre-filters with a Control Pack or a Kontrol Flow filter. The economical approach to medium efficiency filters | | |
 |
|
Maxi-40 | |||
|
|
- Increases air quality - Long lasting - Energy saving - Better system performance - Low cost Businesses and maintenance department managers who want great performance at a low cost choose Maxi-40 for all their air conditioning and heating needs. The carefully controlled alignment of the Maxi-40's pleats ensures consistent airflow through the filter. Its design increases its filtering surface as air passes through the media on each side of the pleats, reaching maximum media surface. The larger dust particles are usually trapped at the bottom of the pleats, while the smaller ones collect on the sides. |
| ||
|
 |
|
Maxi-40 Antimicrobial | |||
|
|
- Prevents migration of microorganisms through the filter - Treatment becomes an integral part of the filter throughout its use - Does not cause any side effects compared to some other antibacterial agents - Treatment ensures 86.5% efficiency during initial air flow - Proves to be necessary in location where air quality is crucial - Antibacterial agent's efficiency increases proportionately to the filter's holding capacity This antibacterial treatment is registered with the environmental protection agency. Treated with an antibacterial and antifungal agent, the media is surface durable and non-leeching. The treatment continues to be effective for the life of the filter. |
| ||
|
 |
|
Maxi-60 | |||
|
|
- Increases air quality - Long lasting - Energy saving - Better system performance - Low cost Businesses and maintenance department managers who want great performance at a low cost choose Maxi-60 for all their air conditioning and heating needs. A flat, large surface pleated filter with an aerodynamic design and superior filtering capacity. The alignment of the Maxi-60's pleats ensures consistent airflow through the filter. Its design increases its filtering surface as air passes through the media on each side of the pleats. The larger dust particles are usually trapped at the bottom of the pleats, while the smaller ones collect on the sides. |
| ||
|
 |
|
Change-A-Pleat | |||
|
|
The Disposable Deep Pleat Insert System Economical! Change-A-Pleat filter inserts cost less than conventional disposable panel filters or fiberglass pads. - Less labor costs as they normally last three times longer - Less housekeeping and maintenance costs for walls, equipment and furnishings - Less required maintenance to heat transfer surfaces More efficient! The non-woven cotton and polyester has been developed and tested for high dust loading capacity, and the extended surface and controlled pleat spacing allow particle entrapment over a greater area. The Change-A-Pleat insert system was designed not only to upgrade air filtration wherever panel filters are used, but also as an economical, quick and efficient way to perform filter change-out maintenance using a pad holding frame. The filter media is shipped compressed and tied around the cardboard end caps for easy handling. To meet the requirements of the user, the inserts may be ordered untied and without end caps. Bulk media is available. Alternate crown heights are also available. |
| ||
|
 |
|
Dust Controller | |||
|
|
For residential use. Available in a number of thickness and three standard sizes: 16 x 25, 20 x 25, 20 x 20 - Pleated model, 25 to 30% efficiency - Pleated model with antibacterial protection - Pleated model with odor control - Pleated model, 60% efficiency We can produce the filter you need to improve air quality in your home. The pleated design of the air filter provides more surface and lower resistance. When installed in a central air conditioning and heating system, the irritants contained in the forced air are caught by the filter. |
| ||
|
 |
|
Electrostatic filter | |||
|
|
The electrostatic filter uses static electricity to create a passive (non-electric) air cleaner. Two layers of polypropylene grids create a harmless static charge that attracts and holds airborne allergenic house dust. The electrostatic filter has 0.15 initial resistance and removes laboratory test dust up to 94% arrestance. House dust is composed of a mixture of fibers from different types of fabrics, feathers and other stuffing materials. It also contains bacteria, mold and fungus spores, pollen, food particles, human and pet dander, bits of plants and insects, hairs and those dreadful dust mites, these crab-like bugs so tiny that 42,000 live in one ounce of dust and two million can take up residence in an average bed. |
| ||
|
 |
|
L-Frames | |||
|
|
Create a filtration wall with these modular filters L-Frames are available in six standard sizes: 16x20, 16x25, 20x20, 20x25, 12x24 and 24x24. Once the L-frames are assembled, filters can easily be installed. This modular system is especially useful as it allows for use of medium and high efficiency cartridges as pre-filters as well as final filters. Each frame is made of 16-gauge galvanized steel and features a self-sealing joint to prevent air bypass. |
| ||
|
